Not waterproof. Submersible.
Outdoor LED strip lighting — sealed end to end, rated for permanent water contact. Salt air, pool chemicals, Queensland summers. Built for all of it.
Have a sketch? Upload it for an instant estimate.
The problem
Why most outdoor strip lighting fails in Australia.
IP65/66 is not enough.
Most imported strip lighting is rated IP65 or IP66 — dust and splash resistant. That's adequate indoors. Outdoors in Australia, it isn't. Water finds its way in through connector joints, end caps, and micro-cracks in the silicone sleeve. IP65/66 fails in conditions that IP68 handles without issue.
UV and heat degrade standard silicone.
Australian summer UV intensity is among the highest in the world. Standard silicone sleeves yellow, crack, and allow moisture ingress within 18–24 months. The failure isn't the LEDs — it's the housing that was never rated for the exposure.
Connector corrosion is the silent killer.
Coastal properties add salt air to the equation. Unprotected connectors corrode at the contact points. Voltage drops. Sections go dark. The strip looks fine — the connectors aren't. Sealed end-to-end means sealed from the driver to the terminal — the full system is submersible, not just the strip.
Orenara is fully submersible — end to end.
Dust-tight and submersion-rated (IP68, 1.5m for 30 minutes). Every component in the system — strip, connectors, end caps — carries the same rating. Not just the strip itself. That's what proper outdoor-rated means.
IP68. SUBMERGED. OPERATING.
The Difference
Most strip lighting is waterproof until it rains.
Sealed silicone, end to end. No seams, no glued joints, no ingress path. Orenara strip is fully submersible, permanently — rated IP68 end to end. Garden beds that flood, pool edges that splash, coastal frontages that cop salt and summer storms. It runs through all of it because it was specced for exactly that.
Environments
Built for where lighting actually fails.
Six conditions that kill cheap outdoor strip lighting. One spec that doesn't change for any of them.
Commercial & Hospitality
Higher use, same standard — not a lesser one.
Resorts, hospitality venues, strata common areas, and public/council pathways get more daily use and less forgiving maintenance schedules than a private home. The spec doesn't change for commercial application — it's the same fully submersible system (IP68), the same 0–10V dimming, the same RCM-compliant components, just specified at scale for a larger site.
Pool & Aquatic
Permanent water contact, not occasional splash.
Pool edges, water features, and submerged garden elements don't get wet occasionally — they're wet constantly, and often chemically treated. This is the application most outdoor lighting was never actually built for, IP65/66 ratings included. It's fully submersible — rated for permanent water contact, not splash resistance dressed up as waterproofing (IP68: 1.5m for 30 minutes, dust-tight).
Marina & Private Berths
Timber decking, constant moisture, zero forgiveness for corrosion.
Private berths and marina walkways combine every hard condition at once — salt air, direct water exposure, and timber decking that expands and contracts with the weather. It's an unforgiving install for standard connectors. Orenara's fully submersible sealed system (IP68) and segmented track hold a clean line along a pontoon edge the same way they hold a garden path — same spec, same rating, harder setting.
Coastal
Salt air doesn't announce itself. It just corrodes.
Properties within a few kilometres of the coast carry salt air year-round, not just on windy days. It gets into connector joints that look sealed but aren't, corroding contact points from the inside. Voltage drops. Sections go dark months before anyone notices why. Orenara's connectors are sealed end-to-end — driver to terminal — submersible-rated to the same standard as the strip itself (IP68), not treated as an afterthought.
Tropical & Humid
Queensland summer doesn't wait for a warranty claim.
Australian UV intensity is among the highest in the world, and monsoon-season humidity compounds it. Standard silicone sleeves yellow, crack, and let moisture in within 18–24 months — well before most warranty periods even matter. The failure isn't the LEDs themselves; it's housing that was rated for a milder climate than the one it's actually installed in.
Rural & Acreage
Dust, heat swings, and runs longer than anyone plans for.
Acreage, rural driveways, and fence-line runs face problems the suburbs don't — fine dust that works into any gap, day-to-night temperature swings that expand and contract cheap housing until it cracks, and cable runs long enough that a single weak joint takes out the whole line. The 6 in IP68 means dust-tight, not just water-resistant — sealed against the grit that quietly kills lesser strip long before the LEDs ever wear out.
Built for the conditions Australian coastal, tropical, and commercial properties actually face — salt air, permanent water contact, and monsoon humidity. Not oil rigs, not naval vessels, not mining sites. If your project needs marine-vessel or defense-grade certification beyond IP68, tell us upfront — we'll be straight with you about whether we're the right fit.
Whatever the environment, the system is the same — sealed, submersible, built to order.
GALLERY
Where the system lives.
Pool coping, water features, garden edges, paved terraces. Sealed end to end, warm white throughout.
1 / 10
Every kit includes
Four components. One complete system.
Strip, channel, connectors, and driver — matched, pre-specced, and ready to install. Nothing to source separately.
01
IP68 Silicone Strip
- Dot-free diffusion
- Fully submersible
- Sealed end caps
- 24V DC
02
Channel & Mount
- Aluminium or stainless
- Straight or flexible
- Matched to application
- Diffuser included
03
Factory IP68 Connectors
- Moulded onto strip ends
- Pressure-tested
- Before dispatch
- No field sealing
04
Driver
- Mean Well HLG
- IP67 rated
- Sized to the run
- Hardwired to mains
All kits are pre-specced by application. Your licensed electrician hardwires the driver and connects it to mains.
What's in every kit
One box. Everything needed to install.
Every Orenara kit ships with matched components. No driver sourcing, no compatibility guesswork, no site visits.
- 01
Silicone LED Neon Strip
Submersible IP68 — dot-free diffusion, sealed end caps
- 02
24V Dimmable Driver
100–150W, IP67 rated, 0–10V dim input, 240V feed
- 03
Touch Dimmer Panel
Wall-mount control, scene presets, wireless pairing
- 04
240V Mains Lead
Pre-terminated leads — electrician connection required
The mounting system
Straight lines are easy. Curves are the hard part.
Any strip lights up fine in a straight run. The hard part — the part most products get wrong — is a curve that still looks intentional five years in.
Rigid Channel
- Aluminium channel with click-in strip mounting.
- For pergola beams, benchtops and straight garden edges — anywhere the line doesn't need to bend.
- Zero flex, zero risk of the strip sagging or pulling loose over time.
Flexible Segmented Track
This is the part that actually matters. Most “flexible” strip lighting just relies on the silicone sleeve bending — no structure, no consistent radius. It shows: uneven light spacing at the bend, visible strain points, and a strip that slowly works itself loose from whatever clip was holding it.
- Segmented specifically to bend into a clean, consistent radius — garden paths, pool edges, curved pergola lines.
- The strip clicks directly into the track. Mechanically secured, not resting in a channel and hoping.
- Same strip, same connectors, same IP68 rating end to end as the rigid channel.
Horizontal bend only. This isn't a garden hose — it won't loop vertically, and we won't tell you it does.
SEGMENTED TRACK. CONSISTENT RADIUS. NO STRAIN POINTS.
Pick your mounting system based on the geometry of your space, not the limitations of the product. Straight run: rigid channel. Curve: segmented track. Both take the same strip, same connectors, same IP68 rating end to end.
Pre-specced kits
Choose your application.
Each kit is configured for its application — strip, driver, channel, and connectors matched and pre-specced. Size it to your space and see the price straight away.
Configure online.
Pick your application, size it to your space, and see the price straight away. Pool surround, staircase, garden path, custom zone — each builder is pre-loaded with the right defaults for the application.
Confirm and we'll invoice you.
No wait for standard configurations — confirm your order and we'll send an invoice within one business day. For anything unusual, request a review and we'll get back to you within 1–2 business days with a confirmed spec and price.
Made to order. Shipped to you.
Built to your spec and dispatched direct — we'll confirm the schedule with your invoice and keep you updated through the process. Orenara supplies the system; your licensed electrician installs it.
Made to order, not off the shelf.
We don't hold stock — every system is built to your spec. If your project has a hard deadline, tell us in your enquiry and we'll be straight with you about whether we can meet it. Orenara supplies the system; your licensed electrician installs it.
Most standard configurations price instantly online. For anything complex, use the enquiry form below.
Build Your Kit
Dust-tight. Submersion-rated.
IP68 is the highest standard ingress protection rating defined under IEC 60529. It means completely dust-tight and rated for continuous submersion — in our case, 1.5m depth for 30 minutes. Not splash-resistant. Submersion-rated. The difference matters when a garden irrigation system floods the installation zone or a pool edge takes splash loading daily.
Smooth, flicker-free. Professional-grade.
0–10V is an analogue dimming protocol used in commercial and architectural lighting. It delivers smooth, linear dimming from 0% to 100% without PWM flicker — the high-frequency on/off switching that causes eye strain and shows up on camera. Cheap PWM dimmers flicker at 1,000–20,000Hz. You may not see it directly. Your camera will. And some people can feel it. 0–10V eliminates the problem entirely.
Australian regulatory compliance.
RCM (Regulatory Compliance Mark) is the current Australian and New Zealand mark for electrical equipment compliance. It replaced the old 'SAA' mark. Products entering the Australian market are required to bear the RCM mark if they're electrical goods. Some importers still reference SAA certification — that designation was retired in 2016. Orenara components carry current RCM compliance.
THE SYSTEM, AFTER DARK
Complex projects
Something more complex? Tell us about your space.
For non-standard applications, large runs, or anything that doesn't fit a kit configuration — tell us the scope and we'll come back within 1–2 business days with a confirmed spec and price.